Software Input/Output Guide X11 Administration ... - paulmick.com

Page 438 of 1050 Gate Opener: CEQU (Common Equipment)
Gate Opener: CEQU (Common Equipment)
Prompt Response Comment
REQ CHG Request
TYPE CEQU Change to Common Equipment parameters
- MPED aa Maximum Peripheral Equipment Density (aa = (SD), DD, 4D,
or 8D)
- TERM a...a Single Density Terminal equipment loop or loops
- REMO a...a Single Density Remote Peripheral Equipment loop or loops
- TERD a...a Double Density Terminal equipment loop or loops
- REMD a...a Double Density Remote Peripheral Equipment loop or loops
- TERQ a...a Quadruple Density Terminal equipment loop or loops
- REMQ a...a Quadruple density Remote Peripheral Equipment loop or
loops
- DDCS 0-159 Loop number for NT DPNSS/DASS hardware
- DTCS 1-159 Digital Trunk Channel Switches
- XCT a...a Extended Conference/TDS/MFS
- TDS a...a Tone and Digit Switch
- CONF a...a Conference loop
- MFSD 0, 2, 4…158 Multifrequency Sender loop
- DTDT aaa Dial Tone Detector Test (aaa = NO, TDS, or EXT)
- - CODE x xx xx xx Code (CODE response is defined on page 456)
- - TN l s c u Valid Terminal Number that when accessed returns a test tone
- DLOP lll dd ff ... Digital Trunk Interface Loop or Loops (lll = loop number,
dd = number of voice or data calls, ff = frame format)
- MODE aaaa Mode of operation (aaaa = LINK, PRI, or TRK)
- - TMDI (YES) NO TMDI Card (Mode set to PRI OR TRK)
- - LCMT aaa Line Coding Method (aaa = (B8S) or AMI)
- - YALM aaa Yellow Alarm Method (aaa = (FDL) or DG2)
- - TITE (0) 2 T1 transmit Equalization
- - TRSH 0-15 Threshold
- - DTIC 0, 4, 8,…156 Starting network loop slot for PRI/DTI card
- PRI2 0-159 2.0 Mb/s Primary Rate Interface or PRI loop number
- APVL 0-159 Analog Private Virtual Loop for virtual TN or channel ID
- DTI2 0-159 2.0 Mb/s Digital Trunk Interface or DTI loop number
553-3001-311 Standard 6.00 June 1999