Software Input/Output Guide X11 Administration ... - paulmick.com

LD 10
Alphabetical list of prompts Page 87 of 1050
Prompt Response Comment Pack/Rel
ADL nn x..x Auto Dial
Auto Dial cannot be configured if Hot Line is defined.
nn = number of digits, up to 31 maximum in Auto Dial DN
x..x = Auto Dial DN
Auto Dial is required for BNRA.
Must have Flexible Feature Codes (FFC) package 139.
ffc-15
AEFD y...y Alternate External Flexible Call Forward DN, up to 13
digits. Remove by setting CLS = RTDD or CFTD.
Where yyyy = Alternate Redirection DN.
AEHT y...y Alternate External Hunt DN, up to 13 digits. Remove by
setting CLS = RTDD or CFTD. Where yyyy = Alternate
Redirection DN.
AFD y...y Alternate Flexible Call Forward DN, up to 13 digits.
Remove by setting CLS = RTDD. Where yyyy = Alternate
Redirection DN.
AHNT y...y Alternate Hunt DN, up to 13 digits. Remove by setting
CLS = RTDD. Where yyyy = Alternate Redirection DN.
basic-22
basic-22
basic-22
basic-22
CFW nn x...x ss25-1
Call Forward all calls
Prior to Release 22, valid entries are: 4, 8, 12, (16), 20,
24. Entries between 5 and 22 are rounded up to the next
valid number.
For Release 22, valid entries are any integer in the range
of (4)-31.
Where: nn = maximum number of digits in the CFW DN; it
must be large enough to hold the customer Reply DN.
Where: x...x = Call Forward DN
If the Enhanced System Access feature is configured,
valid entries are 4, 8, 12, (16), 20, 24, 28, 31. Numbers
between 4 and 31 are rounded up to the next valid
number.
If the Enhanced System Access feature is not configured
and x11 release 22 software is equipped, you may input
any integer in the range of (4)-23.
X11 Administration