Software Input/Output Guide X11 Administration ... - paulmick.com

LD 16
Alphabetical list of prompts Page 351 of 1050
Prompt Response Comment Pack/Rel
ACNO 0-99 AIOD Customer Number aiod-1
The Customer Number range depends on system type
and X11 Release. Refer to the CUST prompt in LD 15
for details.
ACOD x...x Access Code for the trunk route basic-1
The ACOD must not conflict with the numbering plan.
Up to 4 digits, up to 7 digits with Directory Number
Expansion (DNXP) package 150.
ADDG 0-(8)-9 Additional digit(s) to be used in ANI sequences.
If LEC and the DN to be transmitted consist of less than
seven digits, ADDG is used as the last digit(s) of the
ANI sequence. Prompted if:
1. Commonwealth of Independent States (CIST)
package 221 is equipped
2. ICOG = OGT
3. TKTP = COT (for analog trunks, TKTP
must = DID)
4. DGTP = DTI2
If ANIC is NO or if ANIC=YES but the ANI entry
associated with the originator of the call is not
configured.
It is used to complete ANI DN if LEC+ANI DN consists
of less than ANSZ digits.
Prompted for outgoing CIS route.
May be from 1 up to the ANSZ length.
cist-21
cist-24
ADDP Add Public Prefixes euroisdn-22
(NO) The prefixes 0 (National) or 00 (International) are not
added to the Calling Party Number if the Type of
Number (TON) is Public on the set/attendant displays
YES The prefixes 0 (National) or 00 (International) are
added to the Calling Party Number if the Type of
Number (TON) is Public on the set/attendant displays
ADCP (NO) YES All-Digital Connection Prefix assigned to customer basic-5
AIA (NO) YES Answered call Identification Allowed cdr-13
Enter YES to output an “A” in the CDR TerID field to
indicate answered calls. Release 13 and later.
Prompted when OAL = YES or OTL = YES.
X11 Administration