Software Input/Output Guide X11 Administration ... - paulmick.com

LD 27
Page 696 of 1050 Alphabetical list of prompts
Prompt Response Comment Pack/Rel
DCH BRI terminal communicates with the packet handler
using multiplexed D-channels over a dedicated
BD-channel
BCH BRI terminal communicates with the packet handler
using a dedicated B-channel
BDCH Both D-channel and B-channel communicate with
packet handler
553-3001-311 Standard 6.00 June 1999
If you select DCH or BDCH, the MISP can support only
31 DSLs because one serial port is dedicated to the
packet handler.
PRES (YES) NO Presentation of CLID to far-end on outgoing calls. bri-18
PRFX 0-9 DNA table Prefix. bri-19
PRI Primary Rate Interface bri-18
0, 2, 4,.....158
Loop numbers.
This Primary Rate Interface is connected to the packet
handler. The Primary Rate Interface must have already
been added in LD 17.
Prompted if B1CT or B2CT = PMD.
xx Card number for Option 11
Where:
• xx = 1-9
PRI_CH loop channel bri-19
PRI for packet handler and BRSC connections. Where:
loop (1-159) = the PRI loop number that is connected to
the external packet handler
channel (1-23) = the PRI channel number where the
dedicated BRSC connection terminates
This PRI loop must have been previously assigned in
LD 17, and must be dedicated to packet handler
connection. The PRI channel must be configured for
BRI packet data in LD 14 and LD 16.