05.02.2013 Views

Software Input/Output Guide X11 Administration ... - paulmick.com

Software Input/Output Guide X11 Administration ... - paulmick.com

Software Input/Output Guide X11 Administration ... - paulmick.com

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

LD 17<br />

Configuration Record 1 Page 427 of 1050<br />

— Prompts are no longer limited to 4 characters. Some prompts appearing<br />

in <strong>X11</strong> Release 19 and later will have more than 4 characters, and can<br />

better define their use. Underscores connect multiple words. For<br />

example, the prompt for the log in name is LOGIN_NAME.<br />

— Release 19 introduces the ability to have several active users logged in<br />

simultaneously. The feature is enabled and disabled through this<br />

program. Refer to <strong>X11</strong> system management applications (553-3001-301)<br />

for <strong>com</strong>plete detail.<br />

— Single Terminal Access (STA) is an application available on the MSDL<br />

card with <strong>X11</strong> Release 19 and later. The STA application reduces the<br />

number of physical devices used to administer and maintain the Meridian<br />

1 and its auxiliary processors. Refer to <strong>X11</strong> system management<br />

applications (553-3001-301) for <strong>com</strong>plete details.<br />

— With Release 19 and later the maximum number of agents is not limited<br />

to 999. The number of agents allowed by the system is determined by the<br />

IDLB and IDUB prompts in LD 23.<br />

Notes on ISDN Configuration<br />

ISDN configuration may be changed by adding the primary D-channel<br />

followed by the optional backup D-channel. Be sure to observe the following:<br />

• Primary and back-up D-channels must be on the same card type<br />

(DCHI or MSDL)<br />

• Primary D-channel parameters are automatically copied to the<br />

back-up D-channel.<br />

• Disable both ends of a D-channel before making any changes to the<br />

D-channel.<br />

• Changes to the D-channel pair should be made to the primary<br />

D-channel first (except for BCHL and RCVP).<br />

• The backup D-channel must be removed prior to removing the<br />

primary D-channel.<br />

<strong>X11</strong> <strong>Administration</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!