Software Input/Output Guide X11 Administration ... - paulmick.com

LD 17
Alphabetical list of prompts Page 461 of 1050
Prompt Response Comment Pack/Rel
DENS SDEN Single ports on SDI card basic-15
DDEN Double ports on SDI card
4DEN Quad ports on SDI card
DES d...d Designator (AML port designation)
DES is used to identify the link and can be up to 16
alphanumeric characters: 0-9, and upper case (A-Z).
Characters * and # are not allowed.
Spaces are removed by the system. For example
“MERIDIAN MAIL” becomes “MERIDIANMAIL”.
Use the underscore character instead, such as
MERIDIAN_MAIL
DES can be left blank or changed as required. If
DES is already defined for a link, the system outputs
the current name and reprompts DES.
Precede the existing DES with X to remove.
Example: “XMERIDIAN_MAIL”.
msdl-18
DIDD (0)-15 DID Delete isdn-16
Number of leading digits to delete when receiving
digits from DID trunk.
DLOP lll dd ff Digital Trunk Interface Loop or Loops. Where:
• lll = 0-159
• lll = 1-9 Option 11
• dd = maximum number of simultaneous voice
or data calls 0-(24)
• ff = frame format D2, D3, D4, or ESF
The default for frame format ff is ESF if prompt
MODE is set to PRI; D3 if MODE is set to DTI or
LINK. Loop must be removed before a change to ff
can be made.
L1 L2 Ln Digital Trunk Interface Loop or Loops
Loop numbers of the DTI Loops associated with this
VAS. Loops must have previously been defined as
MODE = LINK. Precede with X to remove.
dti-5
X11 Administration