Software Input/Output Guide X11 Administration ... - paulmick.com

PII
(NO)
YES
LD 16
Alphabetical list of prompts Page 393 of 1050
Prompt Response Comment Pack/Rel
Privacy Indicator Ignored
Calling Party Privacy Indicator is honored and the
existing functionality is maintained.
The Calling Party Privacy Indicator is ignored. When PII
is set to YES, the CLID Presentation Indicator field in
the Calling Party Number IE is changed from restricted
to allowed and the CPND Indicator field in the Display
IE is changed from denied to allowed.
Note: The PII prompt is shown for information purposes only.
The PII prompt only applies to North American ISDN
interfaces: DMS100, DMS250, ESS4, ESS5, and NI2.
PLEV 0-(2)-7 Priority Level
Priority Level 2 sets can override sets of Level 1 and 2,
and can be overridden by sets of Level 2-7.
Prompted with Priority Override/Forced Camp-On
(POVR) package 186 or Enhanced DPNSS1
Services (DPNSS_ES) package 288.
cpp-23
povr-20
PNDL 2-(6)-10 Process Notification Delay Timer in seconds mfc-24
PNI (0)-32700 Private Network Identifier
Each customer data block must have a unique PNI
when equipped with the multi-customer option. PNI = 1
is typical for customer 0. It must match the PNI in the
far end CDB in order to support such features as
NRAG, NACD and NMS.
The PNI in the RDB functions as a logical customer
number for routing outgoing non-call-associated
Transaction Capability Application Part or TCAP facility
messages to the appropriate ESN translations within
the far end PBX.
Using the default value of PNI = 0 prevents operation of
features such as NRAG, NACD and NMS.
pra-12
PNNC (NO) YES Process Notification Networked Calls mfc-24
PNPS (0)-30 Interval between messages (2 seconds increments) mfc-24
X11 Administration