Software Input/Output Guide X11 Administration ... - paulmick.com

262
LD 15
LD 15: Customer Data Block
LD 15
Issued: June 1999
Status: Standard
X11 Release: 24
Page 227 of 1050
This program allows data blocks for customers to be created or modified.
When the Overlay is loaded, the available system memory and disk records
are output in a header as follows:
CDB000
MEM AVAIL: (U/P): xxxxxx USED: xxxxx TOT: xxxxxxx
DISK RECS AVAIL: xxx
Changes for Release 21
With Release 21, Overlay program 15 has been restructured to allow
changes to be made by entering the desired gate opener mnemonic at the
TYPE: prompt. The prompt sequence associated with that gate opener is then
prompted in the usual manner. Once the end of the sub prompts has been
reached, the Customer Data Block is updated and saved.
Enhanced input processing has also been applied to the REQ: and TYPE:
prompts in LD 15. Thus, if the prompt ends with a colon a list of possible
responses may be obtained by entering ? followed by a carriage return. The
REQ: and TYPE: prompts also accept abbreviated responses, thus allowing
the user to only enter the first three unique characters of the gateway name.
X11 Administration