Software Input/Output Guide X11 Administration ... - paulmick.com

LD 15
Page 300 of 1050 Alphabetical list of prompts
Prompt Response Comment Pack/Rel
LEC 0-99..99
X
553-3001-311 Standard 6.00 June 1999
Local Exchange Code, 1 to 15 digits.
Remove LEC
LEND List Entry Number Delimiter ssc-22
(NO) A delimiter (*) is neither required nor allowed between
the list entry number and telephone number
YES A delimiter (*) is required between the list entry number
and telephone number.
LEND is prompted with packages scc-1 or ssc-34
LFFD x00..x00 First DN of lamp field array for ILF.
The system shows the status of the next 150
consecutive DNs. Last two digits of first DN must be 00.
First DN must start on even 100 (e. g., 3400 is
acceptable, but 3450 is not).
Precede with X to remove. Prompted when OPT = ILF.
LFTN l s c u Lamp Field array Terminal Number
LFTN is prompted again for a second lamp field array.
For Supervisory Console, when assigning lamp field
array to show Attendant status, enter the secondary TN
of the console.
To remove the second LFTN, enter “0”. To remove both
LFTNs, enter XLF in response to prompt OPT.
Prompted when OPT = ILF. Not allowed for 2000/3000
series telephones.
c u For Option 11
basic-1
basic-1
LINK (NO) YES ACD DNIS Link option. Prompted if OPT = DNI. dnis-10
LLT Flexible Line Lockout Treatment basic-4
(OVF) Overflow tone
ATN Attendant
OFA Overflow, then Attendant
LOCL 1-(10) Flexible length of Vacant Number Routing (VNR)
Location digits (LOC). Enter the maximum number
of LOC digits expected by VNR.
fnp-14