Software Input/Output Guide X11 Administration ... - paulmick.com

29 30 Option 11 base conference capability
31 Option 11 Expansion Module
LD 17
Alphabetical list of prompts Page 457 of 1050
Prompt Response Comment Pack/Rel
29 30 Option 11C base conference capability
31 Option 11C Provided on the first single port
expansion daughterboard
62 Option 11C Provided on the second single port
expansion daughterboard
31 94 Option 11C Line Size Expansion Provided on the
first dual port fibre expansion daughterboard
62 95 Provided on the second dual port fibre expansion
daughterboard
basic-24
CO_TYPE Central Office switch type. Prompted if IFC = NI2. ni2-21
(STD) 100% compatible with Bellcore standard
ATT AT&T 5ESS
CRC 1-(10)-20 CRC threshold. Enter in units of 5 per cent.
CRC establishes the % of Cyclic Redundancy Code
(CRC) errors detected in 15 minutes before an
out-of-service threshold is enforced.
CRC = (# of packets retransmitted) ÷ (total # packets
sent).
CSQI (20)-255 Maximum number of call registers for CSL input
queues
These call registers are used for Command and
Status Link applications such as Meridian Link.
Set CSQI and CSQO equal to the larger number of
either:
1. ACD agents or AST sets to be controlled by
the host computer, or
2. 50.
Do not set CSQI and CSQO to a number exceeding
25 percent of the total number of call registers.
cls-7
cls-7
X11 Administration