Software Input/Output Guide X11 Administration ... - paulmick.com

LD 15
Page 278 of 1050 Alphabetical list of prompts
Prompt Response Comment Pack/Rel
CWBZ Call Waiting Buzz basic-1
(NO) YES First field-Provide two second buzz on exceeding upper
CWCL or CWTM threshold.
(NO) YES Second field-Buzz on first call entering queue.
CWCL Call Waiting Call Limit
(0)-255 (0)-255
Lower and upper thresholds.
The Call Waiting lamp starts flashing when number of
calls in the queue exceeds the upper threshold. The
lamp continues to flash until the number of calls in
queue is less than the lower threshold. Enter 0 to
disable this feature.
basic-1
(0)-1000 (0)-1000
Lower and upper thresholds defined as a percentage of
the active consoles when OPT = FACA.
553-3001-311 Standard 6.00 June 1999
When the FACA/FACD option is changed, a new value
for CWCL must be set or the default values are used.
The CWCL values for the tenant-level are set equal to
the customer-level values. CWCL is also prompted in
LD 93.
CWTM (0)-511 (0)-511
Lower and upper thresholds for Call Waiting Time.
The Call Waiting lamp starts flashing when the call in
the queue exceeds the upper threshold. The lamp
continues to flash until the wait time is less than the
lower threshold. Enter 0 to disable this feature.
basic-1
CWUP (NO) YES Call Waiting queue Update dcon-15
Prompted with M2250 Attendant Console (DCON)
package 140. The M2250 type consoles can be notified
every time there is a change to the Call Waiting queue.
DACT_BUSY Boss’s Lamp status when BSFE is disabled and set is
busy.
(LIT) LCD Lamp is on.
WINK LCD Lamp flash rate is 60 impulses per minute.
FLSH LCD Lamp flash rate is 30 impulses per minute.
DARK LCD Lamp is off.
ffcsf-24