Software Input/Output Guide X11 Administration ... - paulmick.com

LD 17
Page 466 of 1050 Alphabetical list of prompts
Prompt Response Comment Pack/Rel
ESDI YES NO Enhanced Serial Data Interface
Default is as previous if ADAN = CHG. The default is
NO if ADAN = NEW and no ports on the card are
configured, or if the other port is configured and is
not ESDI. The default is YES if the other port is
configured and is ESDI.
EXT0 x aaa bbb Extenders for CPU 0
Not prompted for Options 11, 21, ST, 21E, STE.
Identifies the types of extenders that connect the
Central Processing Unit or CPU to the various
Network shelves. Where:
• x = Group number
• aaa = extender type located on the CPU shelf
• bbb = extender type located on the Network
shelf
basic-19
553-3001-311 Standard 6.00 June 1999
Valid inputs :
• x = 0-4
• aaa = NIL for ACB cables or passive Bus
Extender on CPU shelf 0.
• aaa = SBE for Segmented Bus Extender on
CPU shelf 0 cabled to Network shelf 3PE or
Network shelf backplane connectors ACB.
• bbb = NIL if Network shelf not equipped.
• bbb = 3PE for 3 Port Extender on a Network
shelf cabled to a SBE on CPU shelf 0, or
cabled to CPU shelf 0 backplane connectors
ACB.
EXT1 x aaa bbb Extenders for CPU 1
Identifies the types of extenders that connect the
Central Processing Unit or CPU to the various
network shelves. Where:
• x = Group number
• aaa = extender type located on the CPU shelf
• bbb = extender type located on the Network
shelf
basic-19