Software Input/Output Guide X11 Administration ... - paulmick.com

LD 11
Page 162 of 1050 Alphabetical list of prompts
Prompt Response Comment Pack/Rel
xx SCC yyyy optf-1
Speed Call Controller key
Where: yyyy = SCL list number = 0-253 prior to Release
13, 0-8190 Release 13 and later. SCL must be defined in
LD 18.
On the M3903, M3904, M3905, key 23 is reserved for basic-24
SCC, SCU, SSU, SSC or NUL.
xx SCN yyyy (ccc or D) zz..z basic-20
Single Call Non-Ringing key
Where:
• yyyy = DN
• ccc = CLID entry of (0)-N, where N = the value
entered at the SIZE prompt in LD 15 minus 1.
• D = the character D may be entered to search a
CLID entry from key 0 and up to find a DN key.
The CLID associated with the found DN key will
then be used.
• zz..z = additional information required for the key
aaa. For Release 24 and later.
The DN can be up to 4 digits, up to 7 digits with Directory
Number Expansion (DNXP) package 150. With
Releases 18 and later, once the SCN key has been
defined, MARP is prompted.
On the M3901, M3902, key 0 is reserved for SCN. basic-24
553-3001-311 Standard 6.00 June 1999