Bernese GPS Software Version 5.0 - Bernese GNSS Software

22. Data Structure
CODE’S MONTHLY GNSS P1-P2 DCB SOLUTION, YEAR-MONTH 03-05 05-JUN-03 14:17
--------------------------------------------------------------------------------
DIFFERENTIAL (P1-P2) CODE BIASES FOR SATELLITES AND RECEIVERS:
PRN / STATION NAME VALUE (NS) RMS (NS)
*** **************** *****.*** *****.***
G01 -1.552 0.004
G02 -2.823 0.006
G03 -1.072 0.005
G04 0.222 0.009
... ... ...
G29 0.576 0.006
G30 1.421 0.005
G31 -0.036 0.008
R03 0.857 0.030
R05 25.907 0.056
R07 -1.370 0.188
... ... ...
R22 -7.880 0.025
R23 -5.789 0.029
R24 0.630 0.045
Figure 22.27: Differential P1-P2 code biases for GNSS satellites (DCB file).
GLONASS. Note that a bias value specific to a receiver is addressed with the corresponding
station name. The type of code biases is indicated by the string “P1-P2” or “P1-C1 in the
header of the file.
More information concerning DCBs may be found in Chapter 13 or in [Schaer, 1999].
22.7.12 Receiver Clock Coefficients
Type: ASCII
Directory: Campaign-specific directory ORB.
Extension: CLK
ATTENTION: same extension and directory as the Bernese satellite clock
file.
Content: Receiver clock corrections (for simulation purposes only).
Created by: User-defined.
Used by: GPSSIM (”Menu>Service>Generate simulated observation data”).
Example: Figure 22.28 and ${X}/DOC/EXAMPLE2.CLK.
RECEIVER CLOCKS AS POLYNOMIALS OF DEGREE N-1
POLYNOMIAL COEFFICIENTS IN SEC, SEC/DAY, SEC/DAY**2,...
STATION N A0 A1 A2 A3 A4 A5
CHASSERAL 6 -0.003002+0.001234-0.000000+0.010000-0.034556-0.023476
GENEROSO 6 +0.020000-0.010000+0.010000-0.005045-0.000345-0.123456
TITLIS 6 -0.013000+0.020000-0.001234+0.001000-0.006000-0.500000
ZIMMERWALD 6 +0.016017-0.000123+0.000222-0.002000-0.012345+0.000555
Figure 22.28: Receiver clock corrections (for simulation only).
Page 512 AIUB