Dokument 1.pdf - RWTH Aachen University

Literaturverzeichnis
Bryans, A.C. (1986), “Diffuser For A Centrifugal Compressor”, US Patent Number
4,576,550 .
Büscher, C. (2006, nicht publiziert), “Konzeption eines Prüfstands zur experimentellen
Untersuchung einer hochbelasteten Radialverdichterstufe mit Pipe Diffusor”,
Dissertation, RWTH Aachen.
Carrotte, J. F., Young, K. F., Stevens, S. J. (1995), “Measurements of the Flow
Field Within a Compressor Outlet Guide Vane Passage”, ASME Journal of Turbomachinery,
117 , S. 29–37.
Casey, M. V. (1985), “The Effects of Reynolds Number on the Efficiency of Centrifugal
Compressor Stages”, ASME Journal of Engineering for Gas Turbines and Power, 107 ,
S. 541–548.
Casey, M. V., Wintergerste, T. (2000), Best Practise Guidelines: Special Interest
Group on Quality and Trust in Industrial CFD, ERCOFTAC.
Cornell, W.G. (1975), “Experimental quiet engine program - Summary report”, General
Electric Company, nASA CR-2519.
Cousins, W. T. (1997), “The Dynamics of Stall and Surge Behavior in Axial-
Centrifugal Compressors”, Dissertation, Virginia Polytechnic Institute and State University.
Cukurel, B., Lawless, P. B., Fleeter, S. (2010), “Particle Image Velocity Investigation
of a High Speed Centrifugal Compressor Diffuser: Spanwise and Loading
Variations”, ASME Journal of Turbomachinery, 132 .
Cumpsty, N. A (2004), Compressor aerodynamics, Krieger Pub.
Dawes, W.N. (1994), “A Simulation of the Unsteady Interaction of a Centrifugal
Impeller with its Vaned Diffuser: Flows Analysis”, ASME 94-GT-105.
Dean, R. C. Jr. (1976), “The Fluid Dynamic Design of Advanced Centrifugal Compressors”,
Lecture Notes, Fluid Dynamics Institute, Hanover, New Hampshire.
Dean, R. C. Jr., Senoo, Y. (1960), “Rotating Wakes in Vaneless Diffusers”, ASME
Journal of Basic Engineering, D86, S. 563 – 574.
Denton, J.D. (1993), “Loss mechanisms in turbomachines”, ASME Journal of Turbomachinery,
115 , S. 621–656.
152