Dokument 1.pdf - RWTH Aachen University

Literaturverzeichnis
Runstadler, P.W., Dean, R.C. (1963), “Straight Channel Diffuser Performance at
High Inlet Mach Numbers”, ASME 63-WA/FE-19 .
SAE (2004), Aircraft Propulsion System Performance Station Designation and Nomenclature,
Society of Automotive Engineers, aS755 D.
Sanger, N. (1971), “Analytical Study of the Effects of Geometric Changes on the Flow
Characteristics of Tandem-Bladed Compressor Stators”, NASA Report No. TN-D-
6264 .
Senoo, Y., Ishida, M. (1987), “Deterioration of Compressor Performance Due to Tip
Clearance of Centrifugal Impellers”, ASME Journal of Turbomachinery, 109 ,S.55–
61.
Shum, Y.K.P., Tan, C.S., Cumpsty, N.A. (2000), “Impeller-Diffuser Interaction in
a Centrifugal Compressor”, ASME 2000-GT-0428.
Smythe, C. (2004), “Forced Response Predictions in Modern Centrifugal Compressor
Design”, Diplomarbeit, Massachusetts Institute of Technology.
Sonoda, T., Schreiber, H.-A. (2007), “Aerodynamic Characteristics of Supercritical
Outlet Guide Vanes at Low Reynolds Number Conditions”, ASME Journal of
Turbomachinery, 129 , S. 694–704.
Srivastava, B. N., Macrorie, M., Machnaim, J. (2004), “Stage Analysis of Centrifugal
Compressors for Design: CFD Validation”, in: 22nd Applied Aerodynamics
Conference and Exhibit.
Stahlecker, D., Gyarmathy, G. (1998), “Investigations of Turbulent Flow in a Centrifugal
Compressor Vaned Diffusor by 3-Component Laser Velocimetry”, ASME 98-
GT-300.
Stein, W., Rautenberg, M. (1988), “Analysis of Measurements in Vaned Diffusers of
Centrifugal Compressors”, ASME Journal of Turbomachinery, 110 .
Strouhal, V. (1878), “Ueber eine besondere Art der Tonerregung”, physikalischmedicinische
Gesellschaft Würzburg.
Strub, R.A., Bonciani, L., Borer, C.J., Casey, M.V., Cole, S. L., Cook, B. B.,
Kotzur, J., Simon, H., Strite, M. A. (1987), “Influence of the Reynolds Number
on the Performance of Centrifugal Compressors”, ASME 87-GT-10 .
158