wilamowski-b-m-irwin-j-d-industrial-communication-systems-2011

6-14 Industrial Communication Systems
17. J. Hauer, V. Handziski, and A. Wolisz, Experimental study of the impact of WLAN interference on
IEEE 802.15.4 body area networks, in Proceedings of EWSN, Cork, Ireland, February 11–13, 2009.
18. I. Howitt et al., Wireless industrial sensor networks: Framework for QoS assessment and QoS management,
ISA Transactions, 45, 347–359, 2006.
19. I. Howitt and J.A. Gutierrez, IEEE 802.15.4 low rate wireless personal area network coexistence
issues, IEEE Wireless Communications and Networking, 3, 1481–1486, 2003.
20. IML Group Plc, Wireless hart specification released, Control Engineering Europe, June/July 2007.
21. X. Jiang, J. Polastre, and D. Culler, Perpetual environmentally powered sensor networks, in Proceedings
of IEEE Workshop on Sensor Platform, Tools and Design Methods for Networked Embedded Systems
(SPOTS), Los Angeles, CA, April 25–27, 2005.
22. E.V. Kar, Z. Lukszo, and G. Leus, Wireless networks in the process industry: Opportunities for ultrawideband
applications, in Proceedings of IEEE International Conference on Networking, Sensing and
Control, Ft. Lauderdale, FL, April 23–25, 2006.
23. A. Karalisa, J.D. Joannopoulosb, and M. Soljacic, Efficient wireless non-radiative mid-range energy
transfer, Annals of Physics, 323(1), 34–48, 2008.
24. V. Kawadia and P.R. Kumar, A cautionary perspective on cross layer design, IEEE Wireless
Communication, 12(1), 3–11, 2005.
25. H. Korber, H. Wattar, and G. Scholl, Modular wireless real-time sensor/actuator network for factory
automation applications, IEEE Transactions on Industrial Informatics, 3(2), May 2007.
26. U.C. Kozat, I. Koutsopoulos, and L. Tassiulas, A framework for cross-layer design of energy-efficient
communication with Qos provisioning in multi-hop wireless networks, Proceedings of IEEE INFOCOM,
Hong Kong, China, Vol. 2, pp. 1446–1456, March 2004.
27. L. Krishnamurthy et al., Design and deployment of industrial sensor networks: Experiences from a
semiconductor plant and the north sea, in Proceedings of Sensys, San Diego, CA, November 2005.
28. K.S. Low, W.N.N. Win, and J.E. Meng, Wireless sensor networks for industrial environments, in
Proceedings of International Conference on Computational Modelling, Control and Automation,
Vienna, Austria, pp. 271–276, 2005.
29. B. Lu and V.C. Gungor, Online and remote energy monitoring and fault diagnostics for industrial
motor systems using wireless sensor networks, in IEEE Transactions on Industrial Electronics,
56(11), 4651–4659, November 2009.
30. P. Mannion, Handset forms sensor gateway, Electronic Engineering Times, October 2007.
31. P.D. Mitcheson, T.C. Green, E.M. Yeatman, and A.S. Holmes, Architectures for vibration-driven
micropower generators, Journal of Microelectromechanical Systems, 13(3), 429–440, 2004.
32. G. Montenegro, N. Kushalnagar, J. Hui, and D. Culler, Transmission of IPv6 Packets over IEEE
802.15.4 networks, IETF RFC 4944, September 2007.
33. J. Paradiso and T. Starner, Energy scavenging for mobile and wireless electronics, Proceedings of
IEEE Pervasive Computing, 4(1), 18–27, 2005.
34. A. Perrig, J. Stankovich, and D. Wagner, Security in wireless sensor networks, Communications of the
ACM, 47, 53–57, 2004.
35. F. Pellegrini, D. Miorandi, S. Vitturi, and A. Zanella, On the use of wireless networks at low level of
factory automation systems, IEEE Transactions on Industrial Informatics, 2, 129–143, 2006.
36. S. Pollin et al., Harmful coexistence between 802.15.4 and 802.11: A measurement-based study, in
Proceeding of IEEE CrownCom, Piscataway, NJ, May 2008.
37. D. Porcino and W. Hirt, Ultra-wideband radio technology: Potential and challenges ahead, IEEE
Communications Magazine, 41, 66–74, 2003.
38. G.J. Pottie and W.J. Kaiser, Wireless integrated network sensors, Communications of the ACM, 43(5),
551–558, May 2000.
39. H. Ramamurthy, Wireless industrial monitoring and control using a smart sensor platform, IEEE
Sensors Journal, 7(5), 611–618, May 2007.
© 2011 by Taylor and Francis Group, LLC