iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
Conditions
1. Changing from speakerphone to handset or vice versa during a mute condition will eliminate
mute status.
2. Returning to idle or placing another CO or intercom call will deactivate mute status and return
to the normal (active microphone) status.
Programming
VOICE CONFIG
Station Data – Common Attributes – Headset Ring
Related Features
Speakerphone
Headset Compatibility
Hardware
LIP Phone
2.57 OFF-HOOK SIGNALING
Description
Off-hook Signal is a muted ring signal delivered to the LIP Phone speaker. When an off-hook
station receives a call, or a CO call rings into the system for the off-hook station, the station will
receive the assigned Off-hook Signal (ring), or a Camp-On in the case of ICM calls (Voice-Over
Announcement or Off-hook ring signal may be received).
Operation
System
Operation of Off-hook ring signals is automatic.
Conditions
1. While using the speakerphone, a Camp-On tone is provided over the speaker in place of the
assigned Off-hook ring Signal.
2. DND overrides and terminates any Off-hook signaling.
3. Off-hook ring signals terminate when the call is answered, forwarded, or abandoned.
4. A Station that receives an off-hook signal will receive normal ring signaling once the Station
returns to idle.
Programming
2-89