iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
Attendant
To print the CO Traffic Summary Report:
1. Press the [PGM] button.
2. Dial 0128 (CO Traffic Summary report code).
3. Select Analysis Period (1-5).
4. Press the [SAVE] button.
To print the CO Hourly Traffic Report:
1. Press the [PGM] button.
2. Dial 0129 (CO Hourly Traffic report code).
3. Select CO Group (00-05).
Conditions
Programming
Related Features
SMDR (Station Message Detail Recording)
Hardware
Device to capture reports
2.33 VSF INTEGRATED AUTO ATTD/VOICE MAIL
2.33.1 VSF
Description
The Voice Store & Forward (VSF) unit, which is equipped in iPECS SBG-1000, provides the
system memory to support the integrated Auto Attendant, Voice Mail and system announcement
applications available in the System. The memory is employed to store Auto Attendant
announcements, voice mail, greetings and messages, and various system prompts. The system
prompts (time, date, etc.) are used by the Auto Attendant and Voice Mail applications as well as
other system features. The VSF has a storage capacity of up to 240/480 minutes of announcement
and message storage; approximately 10 minutes of storage is generally used for fixed system
prompts. The capacity of VSF storage depends on the lock key for the VSF Memory Extend.
2.33.2 VSF-Auto Attendant
Description
When a call comes into the system through a CO line, the call may be routed to one of 70 user
recorded VSF Announcements. An announcement is assigned as a Station Group announcement
or as Auto Attd announcement with an CCR Table that permits Caller Controlled Routing (CCR).
2-54