iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
6.4.11 Setting Up a PPTP Server
iPECS SBG-1000 can act as a Point-to-Point Tunneling Protocol (PPTP) Server, accepting PPTP
client connection requests.
To set up a PPTP Server, perform the following:
1. Click the ‘New Connection’ link in the ‘Network Connections’ screen (see Figure 6.11). The
‘Connection Wizard’ screen appears (see Figure 6.12).
2. Select the ‘Connect to a Virtual Private Network over the Internet’ radio button and click
‘Next’. The ‘Connect to a Virtual Private Network over the Internet’ screen appears (see
figure ‘Connect to a Virtual Private Network over the Internet’).
3. Select the ‘VPN Server’ radio button and click ‘Next’. The ‘VPN Server’ screen appears.
Figure 6.154 VPN Server
4. Select the ‘Point-to-Point Tunneling Protocol Server (PPTP Server)’ radio button and click
‘Next’. The ‘Point-to-Point Tunneling Protocol (PPTP)’ screen appears.
Figure 6.155 Point-to-Point Tunneling Protocol (PPTP)
5. Specify the address range that iPECS SBG-1000 will reserve for remote users. You may
use the default values as depicted in Figure 6.155.
6. Click ‘Next’. The ‘Connection Summary’ screen appears (see Figure 6.156). Note the
attention message alerting that there are no users with VPN permissions.
236