iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
You can edit the configuration of each port. To do so, click a connected port’s
‘Port LAN Settings’ screen appears.
action icon. The
Figure 6.22 Port LAN Settings
Default VLAN ID The port’s VLAN identifier. You may add additional identifiers to the VLAN by
clicking ‘New Entry’.
Refer Section 6.4.17 VLAN configuration for detail information.
6.4.3.4 Advanced
This sub-tab enables you to configure the following advanced switch settings.
Internet Connection Firewall Your gateway’s firewall helps protect your computer by preventing
unauthorized users from gaining access to it through a network such as the Internet. The firewall
can be activated per network connection. To enable the firewall on this network connection, select
the ‘Enabled’ check box. To learn more about your gateway’s security features, refer to
Section 5.2.
Figure 6.23 Internet Connection Firewall
Additional IP Addresses You can add alias names (additional IP addresses) to the gateway by
clicking the ‘New IP Address’ link. This enables you to access the gateway using these aliases in
addition to the 192.168.1.1 and the http://sbg-1000.home.
Figure 6.24 Additional IP Addresses
6.4.4 Setting Up a LAN Bridge
The LAN bridge connection is used to combine several LAN devices under one virtual network. For
example, creating one network for LAN Ethernet and LAN wireless devices. Note that when a
bridge is removed, its formerly underlying devices inherit the bridge’s DHCP settings. For example,
170