iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
7. ICMP replay – an ICMP replay message has been blocked.
8. ICMP redirect protection – an ICMP redirected message has been blocked.
9. Packet invalid in connection – a packet has been blocked, being on an invalid connection.
10. ICMP protection – a broadcast ICMP message has been blocked.
11. Broadcast/Multicast protection – a packet with a broadcast/multicast source IP has been
blocked.
12. Spoofing protection – a packet from the WAN with a source IP of the LAN has been
blocked.
13. DMZ network packet – a packet from a demilitarized zone network has been blocked.
14. Trusted device – a packet from a trusted device has been accepted.
15. Default policy – a packet has been accepted/blocked according to the default policy.
16. Remote administration – a packet designated for iPECS SBG-1000 management has been
accepted/blocked.
17. Access control – a packet has been accepted/blocked according to an access control rule.
18. Parental control – a packet has been blocked according to a parental control rule.
19. NAT out failed – NAT failed for this packet.
20. DHCP request – iPECS SBG-1000 sent a DHCP request (depends on the distribution).
21. DHCP response – iPECS SBG-1000 received a DHCP response (depends on the
distribution).
22. DHCP relay agent – a DHCP relay packet has been received (depends on the distribution).
23. IGMP packet – an IGMP packet has been accepted.
24. Multicast IGMP connection – a multicast packet has been accepted.
25. RIP packet – a RIP packet has been accepted.
26. PPTP connection – a packet inquiring whether iPECS SBG-1000 is ready to receive a
PPTP connection has been accepted.
62