iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
2.8 CO ACCESS
Description
Stations can access outgoing CO lines based on CO Group Access programming. LIP Phones
may use flexible buttons assigned to access a specific {CO} line button for outgoing calls or a
{LOOP} button.
Individual users may be allowed to assign CO access flexible buttons.
Operation
LIP Phone
To place an outgoing CO call:
1. Lift the handset or press the [SPEAKER] button.
2. Press desired {CO} line, {LOOP} button or dial the CO line or Group access code.
To answer an incoming CO call:
1. Lift the handset or press the [SPEAKER] button.
OR
1. Press flashing {CO} line, {LOOP} button and lift the handset to speak privately
SLT
To place an outgoing CO call:
1. Lift handset.
2. Dial the CO line or Group access code.
To answer an incoming CO call:
1. Lift handset.
Conditions
1. When a user dials Access Random CO Line code, the system will search for an idle CO line;
the system may continue to search through all CO lines for an available line.
2. A telephone user not allowed access to a CO line will receive an error tone when access is
attempted. The station may receive transferred calls on such denied access lines but will not
be able to flash or use the CO line for an outgoing call.
3. A station denied access to a CO line but assigned to ring for the CO line will receive ring; the
user may transfer the call using a flashing LED {CO} line button but cannot make an outgoing
call on the CO line.
4. CO lines placed on hold may be retrieved by dialing the 8# (retrieve held CO code) and the
CO line number.
5. The Tx path to a station will be muted until the system has verified the Toll Restriction for the
CO line.
Programming
VOICE CONFIG
Station Data – Common Attributes – CO Group Access
2-16