iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
4. The station is considered busy when:
• in use,
• receiving ICM Ring at an LIP Phone,
• receiving any ring at an SLT.
Programming
Related Features
Intercom Call (ICM Call)
Station User Programming & Codes
Hardware
2.36 INTERCOM CALL (ICM CALL)
Description
A non-blocking ICM is available to all stations in the system. Users may place an intercom call to
other stations in the system by dialing applicable digits as defined in the system Numbering Plan.
Operation
LIP Phone
To place an intercom call:
1. Lift the handset or press the [SPEAKER] button to receive ICM dial tone.
2. Dial station number or press the {DSS/BLF} button.
3. For ring-back tone, await answer or
For Intercom splash-tone, speak and await answer.
SLT
To place an intercom call:
1. Lift the handset to receive ICM dial tone.
2. Dial station number.
3. For ring-back tone, await answer or,
For Intercom splash-tone, speak and await answer.
Conditions
1. Intercom Dial tone will time-out if action is not taken within Dial-Tone Time or, if the time
between digits exceeds the Inter-digit Timer; error tone is received on dial tone time-out.
2. ICM Dial tone is halted after dialing the first digit.
3. If the called station is busy, Intercom Busy tone is provided for the Busy Tone time (7 sec.)
then, Error tone is sent by the system; the caller may disconnect or activate a feature such as
Message Wait/Callback.
2-67