iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
To cancel ACNR while idle:
1. Press flashing {REDIAL} button or [STOP] soft button.
To cancel ACNR during an ACNR attempt:
1. Lift the handset or press the [MUTE] or flashing {REDIAL} button.
System
1. The system initiates the ACNR process, starting the ACNR Pause Timer.
2. At expiration of the timer, the system attempts the previous call.
3. When the called party answers, the calling user may answer by lifting the handset or using
speakerphone to communicate with called party.
Conditions
1. Four timers and a retry counter can be programmed.
• ACNR Pause Timer – Time allowed between ACNR attempts.
• ACNR Delay Timer – At expiration of Pause Timer, if no line is available, the system
will wait for delay timer before retry attempt.
• ACNR Tone Detect – After dialing, the system will abandon retry if no tone or
answer is detected within the Tone Detect time.
• ACNR Retry Count – Count determines the number of times system will retry before
ACNR is automatically cancelled.
2. The call will be placed on the same path as originally used; if the path is busy, an available
CO line in the same group will be seized.
3. The ACNR Retry Counter decreases by one when the system completes the dialed number.
4. When the ACNR Pause Timer expires, if the station is in a busy state, the ACNR Delay Timer
is invoked.
5. Upon completion of dialing, the system will monitor the call for progress signals.
Programming
VOICE CONFIG
System Data – Call Feature Timer – ACNR Delay Timer
System Data – Call Feature Timer – ACNR Pause Timer
System Data – Call Feature Timer – ACNR Retry Counter
System Data – Call Feature Timer – ACNR Tone Detect Timer
Related Features
LNR (Last Number Redial)
Speakerphone
Mute
Hardware
LIP Phone
2-82