iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
2.39 INTERCOM LOCK-OUT
Description
If the user takes no action after going off-hook for the Dial Tone timer or fails to dial an additional
digit within the Inter-digit timer, the station will receive an error tone for 30 seconds and be placed
out-of-service (locked-out). The LED of associated {DSS/BLF} buttons will flutter (flash) rapidly to
indicate the out-of-service status.
For LIP Phone users, if the [SPEAKER] is used, the station will receive an error tone for 30 sec. and
then automatically return to idle.
Operation
System
Operation of Intercom Lock-out is automatic based on the Dial Tone & Inter-digit timers.
Conditions
1. Error tone is presented for 30 sec. followed by 30 sec. of Howler tone followed by lock-out
and silence.
Programming
VOICE CONFIG
System Data – Call Feature Timer - ICM Dial Tone Timer
System Data – Call Feature Timer – Inter Digit Timer
Related Features
Hardware
Intercom Call (ICM Call)
2.40 INTERCOM STEP CALL
Description
When the busy tone is received on a dialed Intercom call, the user may place a call to another
station by dialing the last digit of the station number. The system replaces the last digit of the
previously dialed busy station with the dialed digit and places an Intercom call to the new station
number.
Operation
LIP Phone
To activate step call, while receiving busy on a dialed Intercom call:P
1. Dial a digit other than the last digit of the busy station’s intercom number.
2-70