iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
Conditions
1. Feature codes can be 1-3 digits in length.
2. During programming, conflicts in the Numbering Plan are not allowed; the existing nonconflicting
Numbering Plan is used until correctly updated.
Programming
VOICE INSTALL
Numbering Plan
Related Features
Hardware
2.20 HEADSET COMPATIBILITY
Description
An industry standard headset can be connected to an LIP Phone in place of or in addition to the
handset. The station is then programmed for Headset operation.
In the Headset mode, pressing the [SPEAKER] button will send audio to the Headset instead of the
speakerphone. In addition, when in the Headset mode, ring signals can be delivered to the
speaker or the headset as defined in the system database.
Operation
LIP Phone
To change operation from Speakerphone to Headset:
1. Press the [PGM] button.
2. Dial 12 (Headset select code).
3. Dial ‘0’ to select Headset, ‘1’ to select Speakerphone.
OR,
1. Press [HEADSET] button.
2. Dial ‘0’ to select Headset, ‘1’ to select Speakerphone.
To change the device to receive ring signals:
1. Press the [PGM] button.
2. Dial 13 (Ring select code).
3. Dial ‘1’ for Speaker, ‘2’ for Headset or ‘3’ for both.
To place/answer calls using the headset:
1. Press the [SPEAKER] with the phone in Headset mode.
2-26