iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
10. Click ‘Finish’ to save the settings.
The new IPSec connection will be added to the network connections list, and will be configurable
like any connection. Unlike other connections, it is also accessible via the iPECS SBG-1000’s
‘Shortcut’ screen. To learn more about the configuration of an IPSec connection, refer to
Section 5.4.1.
6.4.13 Setting Up an IPSec Server
To set up an Internet Protocol Security (IPSec) Server, perform the following:
1. Click the ‘New Connection’ link in the ‘Network Connections’ screen (see Figure 6.11). The
‘Connection Wizard’ screen appears (see Figure 6.12).
2. Select the ‘Connect to a Virtual Private Network over the Internet’ radio button and click
‘Next’. The ‘Connect to a Virtual Private Network over the Internet’ screen appears (see
figure ‘Connect to a Virtual Private Network over the Internet’).
3. Select the ‘VPN Server’ radio button and click ‘Next’. The ‘VPN Server’ screen appears.
Figure 6.161 VPN Server
4. Select the ‘Internet Protocol Security Server (IPSec Server)’ radio button and click ‘Next’.
The ‘Internet Protocol Security Server (IPSec Server)’ screen appears.
Figure 6.162 Internet Protocol Security Server (IPSec Server)
5. Enter the IPSec shared secret, which is the encryption key jointly decided upon with the
240