iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
Figure 2.11 Host Information
This screen presents all of the information relevant to the connected computer, such as connection
information, available services, and traffic statistics.
Services This section lists the services on the computer that are available to other computers
from the LAN. When a service is accessible from the LAN, you can activate it by clicking its name.
When a service is accessible via Web access, you can activate it by clicking the ‘Web Access’ link
that appears.
Connection Information This section displays various details regarding the computer’s
connection settings. In addition, you can run a Ping or ARP test by clicking the respective ‘Test
Connectivity’ button. The tests are performed in the ‘Diagnostics’ screen (refer to Section 6.8.7).
Statistics This section displays the computer’s traffic statistics, such as the number and size of
transmitted and received packets.
Connection List This section displays the list of connections opened by the computer on iPECS
SBG-1000’s firewall. The table displays the computer’s source LAN IP address and port, the
gateway’s IP address and port to which it is translated, and the destination WAN IP address and
port.
2.1.4 Viewing Attached Devices
The ‘Attached Devices’ section displays the peripheral devices connected to your gateway. These
may include storage devices and telephones. For example, connect a storage device and refresh
the screen.
10