iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
Figure 5.76 VPN IPSec Properties – Settings
Schedule By default, the connection will always be active. However, you can configure
scheduler rules in order to define time segments during which the connection may be active.
Once a scheduler rule(s) is defined, the drop-down menu will allow you to choose between
the available rules. To learn how to configure scheduler rules, refer to Section 6.9.3.
Network Select whether the parameters you are configuring relate to a WAN, LAN or DMZ
connection, by selecting the connection type from the drop-down menu. For more information,
refer to Section 6.4.1. Note that when defining a network connection as DMZ, you must also:
• Remove the connection from under a bridge, if that is the case.
• Change the connection’s routing mode to “Route”, in the ‘Routing’ sub-tab.
• Add a routing rule on your external gateway (which may be supplied your ISP), informing
of the DMZ network behind iPECS SBG-1000.
3. Click the ‘Routing’ sub-tab, and define the connection’s routing rules. To learn how to
create routing rules, refer to Section 6.6.
Figure 5.77 VPN IPSec Properties – Routing
4. Click the ‘IPSec’ sub-tab, and configure the following settings.
89