iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
2. A station may have multiple {LOOP} buttons.
3. The priority for the appearance of a CO call transfer is first a direct CO Line appearance
({CO} button), if not available, a {LOOP} appearance is used. If there is no appearance
available, the transferring station recalls immediately.
Programming
VOICE INSTALL
VOICE CONFIG
Numbering Plan
Station Data – Flex Buttons
Related Features
Flexible Numbering Plan
Station User Programming & Codes
Hardware
LIP Phone
2.62 STATION USER PROGRAMMING & CODES
Description
LIP Phone users can program an array of functions and features, access status information and
assign special features codes to Flex buttons. The Station User Program Codes used for these
purposes are fixed as listed, and shown below.
Table 2.72-2 Station User Programming
Code Description Entries
11 ICM Answer Mode 1: H, 2: T, 3: P
12 Headset/Speakerphone mode 0:H, 1:S
13 Select Headset Ring type 1:S, 2:H, 3:Both
21 Set Wake-Up Time Once/Permanent & Hour/Min
22 Erase Wake-Up Time
31 LCD Display Language Domestic/English
32 Sys version display
33 Select BGM source (0~1)
34 User Name registration ‘name’
35 Display Phone IP Address
36 Display Phone MAC Address
37 Display Phone Version
38 Network Configuration
41 Forced Forward to Destination Station Group Number
42 {Call Log Display} button
2-94