iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
Table 3.2.4 Station Group Data
ITEM
CAPACITY
Number of Groups 12
Stations in a Group 24
Certain types of groups can incorporate announcements, which are given to the calling party. The
system’s VSF can store up to 70 announcements for use with Station Groups.
NOTE: A station can belong to multiple groups if the groups are of the same type. When a Station
Group is assigned to a group type, the group attributes revert to the default values.
3.2.4.1 Station Group Assignment
Under Station Group Assignments the type, members and Pick-Up attributes are assigned.
Table 3.2.4.1 Station Group Assignment
ATTRIBUTE DESCRIPTION RANGE DEFAULT
Group Type Defines the type of station group. N/A
N/A
Circular
Terminal
Ring
Pick-Up
VSF-VM
IPCR
NET-VM
Pick-up Attribute Stations can pick-up group calls ringing at other stations in
OFF
OFF
the group. This does not apply to VSF groups.
ON
Member Assign stations as members of a station group. -
3.2.4.2 Station Group Attributes
Each type of group has a different set of available attributes relating to announcements, timers,
overflow, etc. The following Tables provide descriptions for the attributes and data entries required.
Table 3.2.4.2-1 Terminal & Circular Group Attributes
ATTRIBUTE DESCRIPTION RANGE DEFAULT
VSF Announce 1 Timer If all stations in the group are busy when a call is
000~999
015
received, the call may continue to wait (queue) for an
available station. If the queue period exceeds the VSF
Announce 1 timer, the call is sent to a VSF
announcement. If the timer is set to 000, the call will
receive the first announcement, in full, prior to the hunt
process (guaranteed announcement).
(seconds)
Guar-Annc(Timer 0) Wait If
Busy
When a call assigned to receive a guaranteed
announcement arrives and all channels are busy, the
call may wait with Ringback until a channel is
available (ON) or bypass the announcement (OFF).
OFF
ON
ON
3-23