iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
3. If you would like to use iPECS SBG-1000’s WINS server, select the ‘Enabled’ check-box.
The screen will refresh, omitting the IP address field (see Figure 5.150).
Figure 5.150 WINS Server
4. Select the ‘Domain Master Browser’ check box if you would like iPECS SBG-1000 to act as
a domain master in the Windows NetBIOS protocol.
5. Click ‘OK’ to save the settings.
Hosts connected to the LAN will register their names and IP addresses with either the specified
remote WINS server or with iPECS SBG-1000’s WINS server, depending on the configuration
above. In both cases, the registered hosts will be added to the ‘WINS Server Host Records’ table
in this screen.
5.5.3 Backup and Restore
iPECS SBG-1000’s backup facility allows backing up data, stored in the system storage area, to
external USB disks. You may specify backups to run automatically at scheduled times. Two
preliminary conditions must be met before enabling the backup mechanism:
• The file server feature must be activated and configured (refer to Section 5.5.1).
• The file server must be consisted of at least two disks.
Please note that the backup is done at the directory level, meaning that it is not possible to backup
a single stand-alone file.
5.5.3.1 Backing Up Your Data
To backup your data:
1. Access the Backup settings either from its link in the ‘Storage’ tab under the ‘Services’
screen, or by clicking the ‘Backup and Restore’ icon in the ‘Shortcut’ screen. The ‘Backup
and Restore’ screen appears:
133