06.03.2015 Views

iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>iPECS</strong> <strong>SBG</strong>-<strong>1000</strong> <strong>User</strong> <strong>Manual</strong> (IP-PBX Features)<br />

Conditions<br />

1. When the mobile phone places an external call through <strong>iPECS</strong>, the CLI of the corresponding<br />

station is used.<br />

2. The Mobile Extension features are supported via system digital (SIP and ISDN) lines only.<br />

3. Message Wait and Callback cannot be activated to a mobile phone.<br />

4. The Mobile Extension feature is not supported over a distributed networked environment.<br />

5. When an incoming SIP or ISDN call is received, the system will access an SIP or ISDN line<br />

and place a call to the mobile phone. Thus, an SIP or ISDN line must be available for the<br />

system to notify the mobile user of the incoming call.<br />

6. Hold and Transfer Recalls to the mobile phone are sent to mobile phone and the associated<br />

station.<br />

7. Circular and Terminal Hunt Group calls can be routed to the active Mobile Extension.<br />

Programming<br />

VOICE CONFIG<br />

Station Data – Mobile Extension<br />

Related Features<br />

DND (Do Not Disturb)<br />

Station Message Wait/Call Back<br />

Attendant Recall<br />

Distributed Control Network<br />

Hardware<br />

LIP Phone<br />

2.80 SYSTEM NETWORKING<br />

2.80.1 Distributed Control Network<br />

Description<br />

In the Distributed Control Network, each <strong>iPECS</strong> <strong>SBG</strong>-<strong>1000</strong> system maintains control over the<br />

devices registered to it. The networked systems communicate allowing other networked systems<br />

access to resources over the network. In addition, other features and functions as detailed in the<br />

following sections of this manual are available to users in a distributed network environment. The<br />

<strong>iPECS</strong> <strong>SBG</strong>-<strong>1000</strong> permits remote access to various resources through registered gateway<br />

Modules and terminals.<br />

In addition, <strong>iPECS</strong> <strong>SBG</strong>-<strong>1000</strong> will request access to resources of remote systems. The user-dialed<br />

number is analyzed and the call routed according to the Net numbering table. Should the main<br />

path fail to respond, the <strong>iPECS</strong> <strong>SBG</strong>-<strong>1000</strong> routes the call employing the alternative Speed Dial<br />

route assigned.<br />

<strong>iPECS</strong> <strong>SBG</strong>-<strong>1000</strong> supports H.450 over IP, for the basic networking functions and the proprietary<br />

<strong>iPECS</strong> protocol for the advanced networking features.<br />

2-116

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!