iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
Figure 6.41 LAN Bridge Settings
Bridge Filter This section is used for creating a traffic filtering rule on the bridge, in order to
enable direct packet flow between the WAN and the LAN. Such an example is when setting up a
hybrid bridging mode (refer to Section 6.4.14.2).
Bridge Hardware Acceleration Select this check box to utilize the Fastpath algorithm for
enhancing packet flow through the bridge. Note that this feature must be supported and enabled
on the bridge’s underlying devices in order to work properly.
6.4.4.2.5 Advanced
This sub-tab enables you to configure the advanced LAN bridge settings.
Internet Connection Firewall Your gateway’s firewall helps protect your computer by preventing
unauthorized users from gaining access to it through a network such as the Internet. The firewall
can be activated per network connection. To enable the firewall on this network connection, select
the ‘Enabled’ check box. To learn more about your gateway’s security features, refer to
Section 5.2.
Figure 6.42 Internet Connection Firewall
Additional IP Addresses You can add alias names (additional IP addresses) to the gateway by
clicking the ‘New IP Address’ link. This enables you to access the gateway using these aliases in
addition to the 192.168.1.1 and the http://sbg-1000.home.
Figure 6.43 Additional IP Addresses
180