iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
7. Back in the ‘Edit Port Triggering Rule’ screen (see Figure 5.18), click the ‘New Opened
Ports’ link. The ‘Edit Service Opened Ports’ screen appears.
Figure 5.21 Edit Service Opened Ports
8. Select UDP as the protocol, leave the source port at “Any”, and enter a 3333 as the single
destination port.
Figure 5.22 Edit Service Opened Ports
9. Click ‘OK’ to save the settings. The ‘Edit Port Triggering Rule’ screen will present your
entered information. Click ‘OK’ again to save the port triggering rule. The ‘Port Triggering’
screen will now include the new port triggering entry.
Figure 5.23 New Port Triggering Rule
This will result in accepting the inbound traffic from the gaming server, and sending it back to the
LAN Host which originated the outgoing traffic to UDP port 2222.
• To temporarily disable a rule, clear the check box next to the service name.
• To reinstate it at a later time, simply reselect the check box.
• To remove a rule, click the service’s action icon. The service will be permanently
removed.
Note: There may be a few default port triggering rules listed when you first access the port
triggering screen. Disabling these rules may result in impaired gateway functionality.
47