iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
Programming
Related Features
SMDR (Station Message Detail Recording)
Traffic Analysis
VSF Integrated Auto Attd/Voice Mail
Dial-by-Name
Station User Programming & Codes
Hardware
LIP Phone
2.67 ATTENDANT CALL/QUEUING
Description
Any station can call the Attendant by dialing the Attendant Call code ‘0’. When an Attendant call
encounters a busy signal, the call is queued to the Attendant; the call will be delivered to the
Attendant.
Operation
To call the Attendant:
1. Dial Attendant Call Code.
Condition
1. The ICM calling party will receive ring-back tone or MOH (as specified) while queuing.
2. Calls to the Attendant’s station intercom number are sent to the Attendant station dialed as
with any intercom call.
Programming
VOICE CONFIG
Station Data – Station Hold Music
Related Features
Attendant Position
Intercom Call (ICM Call)
Hardware
2-101