iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
6.4.10.3 Viewing and Editing the Connection’s Settings
To view and edit the PPTP connection settings, click the ‘PPTP’ link in the ‘Network Connections’
screen (see Figure 6.11). The ‘PPTP Properties’ screen appears.
Figure 6.145 PPTP Properties
6.4.10.3.1 General
This sub-tab enables you to view a detailed summary of the connection’s settings. These settings
can be edited in the rest of the screen’s sub-tabs, as described in the following sections.
6.4.10.3.2 Settings
This sub-tab enables you to edit the following PPTP connection settings:
General This section displays the connection’s general parameters.
Figure 6.146 General PPTP Settings
Schedule By default, the connection will always be active. However, you can configure
scheduler rules in order to define time segments during which the connection may be active.
Once a scheduler rule(s) is defined, the drop-down menu will allow you to choose between the
available rules. To learn how to configure scheduler rules, refer to Section 6.9.3.
Network Select whether the parameters you are configuring relate to a WAN, LAN or DMZ
connection, by selecting the connection type from the drop-down menu. For more information,
232