iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
Figure 5.95 IP Filter List
d. Enter the name “Windows XP to iPECS SBG-1000” for the filter list, and deselect the
‘Use Add Wizard’ check box. Then, click the ‘Add’ button. The ‘Filter Properties’ window
appears.
Figure 5.96 Filter Properties
e. In the ‘Source address’ drop-down menu, select ‘My IP Address’.
f. In the ‘Destination address’ drop-down menu, select ‘A Specific IP Subnet’. In the ‘IP
Address’ field, enter the LAN Subnet (), and in the
‘Subnet mask’ field enter 255.255.255.0.
g. Click the ‘Description’ tab if you would like to enter a description for your filter.
h. Click the ‘OK’ button. Click ‘OK’ again in the ‘IP Filter List’ window to save the settings.
3. Building Filter List 2 – iPECS SBG-1000 to Windows XP:
101