iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
an IP Address Automatically”. Should this not be the case, select the “Use the Following IP
Address” option. The screen refreshes. Enter the IP Address, Subnet Mask, and Default Gateway
provided to you by your ISP.
Figure 3.6 PPTP – Static IP Address
3.2.4 Layer 2 Tunneling Protocol (L2TP)
Select ‘Layer 2 Tunneling Protocol (L2TP)’ from the ‘Connection Type’ drop-down menu.
Figure 3.7 Internet Connection – L2TP
Configure the following parameters according to your ISP information:
•
• L2TP Server Host Name or IP Address
• Login User Name
• Login Password
Select the Internet Protocol:
Most Internet Service Providers (ISPs) provide dynamic IP addresses, hence the default “Obtain
an IP Address Automatically”. Should this not be the case, select the “Use the Following IP
Address” option. The screen refreshes. Enter the IP Address, Subnet Mask, and Default Gateway
provided to you by your ISP.
Figure 3.8 L2TP – Static IP Address
26