06.03.2015 Views

iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>iPECS</strong> <strong>SBG</strong>-<strong>1000</strong> <strong>User</strong> <strong>Manual</strong> (DATA Features)<br />

Figure 5.109 LAN Bridge Properties – General<br />

3. Press the ‘Settings’ tab, and configure the following settings:<br />

Figure 5.110 LAN Bridge Properties – Settings<br />

Internet Protocol Select “Use the Following IP Address”<br />

IP Address Specify 10.5.6.1<br />

Subnet Mask Specify 255.255.255.0<br />

IP Address Distribution Select “DHCP Server”<br />

Start IP Address Specify 10.5.6.1<br />

End IP Address Specify 10.5.6.254<br />

Subnet Mask Specify 255.255.255.0<br />

Note: When configuring Gateway B, the IP address should be 172.23.9.1, according to the<br />

example depicted here.<br />

4. Click ‘OK’ to save the settings.<br />

• WAN Interface Settings<br />

108

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!