06.03.2015 Views

iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>iPECS</strong> <strong>SBG</strong>-<strong>1000</strong> <strong>User</strong> <strong>Manual</strong> (DATA Features)<br />

Figure 6.180 Internet Protocol – No IP Address<br />

Obtain an IP Address Automatically Your connection is configured by default to act as a<br />

DHCP client. You should keep this configuration in case your service provider supports DHCP,<br />

or if you are connecting using a dynamic IP address. The server that assigns the gateway with<br />

an IP address, also assigns a subnet mask. You can override the dynamically assigned subnet<br />

mask by selecting the ‘Override Subnet Mask’ and specifying your own mask instead. You can<br />

click the ‘Release’ button to release the current leased IP address. Once the address has been<br />

released, the button text changes to ‘Renew’. Use the ‘Renew’ button to renew the leased IP<br />

address.<br />

Figure 6.181 Internet Protocol Settings – Automatic IP<br />

Use the Following IP Address Your connection can be configured using a permanent (static)<br />

IP address. Your service provider should provide you with such an IP address and subnet mask.<br />

Figure 6.182 Internet Protocol – Static IP<br />

DNS Server Domain Name System (DNS) is the method by which Web site domain names are<br />

translated into IP addresses. You can configure the connection to automatically obtain a DNS<br />

server address, or specify such an address manually, according to the information provided by<br />

your ISP. To configure the connection to automatically obtain a DNS server address, select ‘Obtain<br />

DNS Server Address Automatically’ from the ‘DNS Server’ drop down menu.<br />

Figure 6.183 DNS Server – Automatic IP<br />

To manually configure DNS server addresses, select ‘Use the Following DNS Server Addresses’<br />

from the ‘DNS Server’ drop down menu (see figure ‘DNS Server -- Static IP’). Specify up to two<br />

different DNS server address, one primary, another secondary.<br />

Figure 6.184 DNS Server – Static IP<br />

To learn more about this feature, refer to Section 5.8.1.<br />

IP Address Distribution In general, the ‘IP Address Distribution’ section enables you to<br />

configure the DHCP server parameters. However, in the WAN-LAN bridge configuration, the<br />

DHCP server must be disabled.<br />

250

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!