iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
Logging Monitor the rule.
• Log Packets Matched by This Rule Select this check box to log the first packet from a
connection that was matched by this rule.
• Schedule By default, the rule will always be active. However, you can define time
segments during which the rule may be active, by selecting ‘User Defined’ from the
‘Schedule’ drop-down menu. If more than one scheduler rule is defined, the ‘Schedule’
drop-down menu will allow you to choose between the available rules. To learn how to
configure scheduler rules, refer to Section 6.9.3.
Note: The defined ALG rule will also be applied to the child processes of the application
that utilizes the selected protocol.
The order of the rules’ appearance represents both the order in which they were defined and the
sequence by which they will be applied. You may change this order after your rules are already
defined (without having to delete and then re-add them), by using the action icon and
action icon.
5.2.9 Viewing the Firewall Log
The ‘Firewall Log’ screen displays a list of firewall-related events, including attempts to establish
inbound and outbound connections, attempts to authenticate through an administrative interface
(WBM or Telnet terminal), firewall configuration and system start-up.
The log’s columns are:
Time The time the event occurred.
Figure 5.41 Firewall Log
Event There are five kinds of events:
• Inbound Traffic: The event is a result of an incoming packet.
• Outbound Traffic: The event is a result of outgoing packet.
• Firewall Setup: Configuration message.
• WBM Login: Indicates that a user has logged in to WBM.
59