iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
Conditions
1. A CO line can have any number of simultaneous queue requests.
2. A station may only have a single active CO queue request; activating a new queue request
will replace, and cancel an existing queue.
3. A Queue recall will always signal the station with a tone ring, ignoring the station’s assigned
Intercom Signaling mode.
4. Queue recall will bypass a busy station, and place the station at the bottom of the queue list.
5. Queue recall will signal a station for 15 seconds, after which, the station is removed from the
queue (the queue is cancelled).
Programming
Related Features
Hardware
CO Access
2.10 THREE-PARTY VOICE CONFERENCE
Description
The system will allow three internal and external parties to be connected on a call, conference. An
unlimited number of 3-party conferences may be established.
Operation
LIP Phone
To establish an ad-hoc conference:
1. Establish first call.
2. Press the [CONF] button; the LED will light, and the connected party is placed on exclusive
hold (the user receives dial-tone).
3. Place second call.
4. When connected, press [CONF]; the new call is placed on exclusive hold.
5. Press [CONF] button to establish 3-party conference.
To place a conference on hold:
1. Press the [HOLD] button; the [CONF] button LED will flash.
To retrieve held conference:
1. Lift the handset
2. Press [CONF] button; all parties will be reconnected.
2-18