iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
Conditions
1. The Alarm contacts must be “dry”, no voltage or current source connected.
2. The Attendant Station will show “ALARM” or “DOOR BELL” as appropriate.
Programming
VOICE CONFIG
System Data – Alarm Attributes
Related Features
Door Open
Hardware
LIP Phone
External contact connected to Alarm input of iPECS SBG-1000, refer to iPECS SBG-1000
Quick Start Guide.
2.78 DOOR OPEN
Description
The iPECS SBG-1000 hardware is equipped with relays that activate External Control Contacts.
The contacts can be assigned to one of several functions including a Door Open Contact. When
used as a Door Open Contact, the contact is connected to a door-lock release mechanism. When
the Attendant Station receives the Door Bell signal, the user may dial the Door Open code to
activate the contact.
LIP Phone users may assign a Flex button as a {DOOR OPEN} button.
Operation
LIP Phone
To assign a Flex button as an {DOOR OPEN} button to terminate the Alarm Signal:
[PGM] + {FLEX} + Door Open code (‘#*’) + [SAVE]
To activate the relay contact
1. Lift handset or press [SPEAKER] button.
5. Dial Door Open code, ‘#*’.
6. Hang-up to return to idle.
Or,
1. Lift handset or press [SPEAKER].
7. Press the {DOOR OPEN} button
8. Hang-up to return to idle.
2-114