iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
3. A name can be entered for a Speed Dial number to permit access from the Dial-by-Name
directory.
4. Stored speed dial number should not include CO access code.
Programming
VOICE CONFIG
CO Line Data – Common Speed Dial
Related Features
Hardware
Dial-by-Name
Display Security
LNR (Last Number Redial)
Save Number Redial (SNR)
Individual Speed Dial
2.29 STATION GROUPS
Description
Stations can be grouped for incoming call routing and Call Pick-up purposes. Up to 12 Station
Groups can be defined with up to 24 stations in a group. Seven types of groups can be defined:
• Circular
• Terminal
• Ring
• Pick-Up
• VSF-Voice Mail
• IPCR
• Net VM (Centralized External VM)
Circular Station Group
In Circular Hunt, calls to a station in the group will go to the station, if unavailable or unanswered in
the hunt no answer time; the call will be directed to the next station defined in the group. The call
will continue to hunt until each station in the group has been tried. The call remains at the last
station or passes to a designated overflow station or group.
A Circular Station Group can be assigned with a pilot number (the Station Group Number) so that
calls to the pilot number will hunt. In this case, the call will be directed to the first station in the
group, and if needed, hunt through each station in the group until reaching the last station. The call
may remain at the last station, passed to an overflow destination or sent to a voice mail-box.
Terminal Station Group
Calls to a station in a Terminal Station Group that encounter an unavailable or unanswered status
will be routed through the hunt process. The call will proceed to the next listed station in the group
2-38