06.03.2015 Views

iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>iPECS</strong> <strong>SBG</strong>-<strong>1000</strong> <strong>User</strong> <strong>Manual</strong> (DATA Features)<br />

added to egress packets with the VLAN ID.<br />

Click ‘OK’ to save the settings. <strong>iPECS</strong> <strong>SBG</strong>-<strong>1000</strong> will request browser reloading.<br />

Figure 6.224 VLAN Settings – Browser Reloading<br />

Click ‘OK’ to proceed. After the ‘Port Settings’ screen is back, the added VLAN ID appears in<br />

the VLAN ID entries table.<br />

Figure 6.225 Switch port Settings<br />

Click ‘OK’ to proceed. You are redirected back to the ‘LAN Ethernet Properties’ screen, in which<br />

the configured port’s VLAN ID is displayed.<br />

Figure 6.226 Switch Ports Properties<br />

You can see added VLAN ID from the table. If you would like to add more VLAN ID to any ports,<br />

try again from Section 6.4.17.2. Especially ‘Port CPU’ must be set properly for connection<br />

on the WAN side hosts or devices because the port is connected with CPU (including<br />

WAN).<br />

273

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!