iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
3. In the ‘Certificate’ drop-down menu, select Gateway A’s newly added certificate.
4. In the ‘Local ID’ field, enter Gateway A’s certificate details. You can copy these details from
the ‘Certificates’ screen under the ‘Shortcut’ tab. Click the certificate and copy the details
from the subject field, for example “C=KR, CN=iPECS SBG-1000-1”.
5. In the ‘Peer ID’ field, enter Gateway B’s certificate details, for example “C=KR, CN=iPECS
SBG-1000-2”.
6. Click ‘OK’ to save the settings.
Perform the same procedure on Gateway B with its respective parameters. When done, the IPSec
connection’s status should change to “Connected”.
Figure 5.130 Connected VPN IPSec Connection
5.4.2 Point-to-Point Tunneling Protocol Server
iPECS SBG-1000 can act as a Point-to-Point Tunneling Protocol Server (PPTP Server), accepting
PPTP client connection requests.
5.4.2.1 Configuring the PPTP Server
Access this feature either from its link in the ‘VPN’ tab under the ‘Services’ screen, or by clicking
the ‘PPTP Server’ icon in the ‘Shortcut’ screen. The ‘Point-to-Point Tunneling Protocol Server
(PPTP Server)’ screen appears:
119