iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (IP-PBX Features)
Table 3.1.2.4 DECT Registration
ATTRIBUTE DESCRIPTION RANGE DEFAULT
Park Code
PARK (Portable Access Rights Key) Code : Unique
14 digits
System Id entered at DECT handset subscription to
identify the system. To assign a PARK code, enter code
and click [SAVE].
AC Code
Authentication Code entered at DECT handset to verify Up to 8 digits
subscription. To assign AC Code, enter AC value and
click [SAVE].
DECT Subscribe
Enable
Enables the system to accept subscription from a DECT
handset.
Desired Station Desired station number for the wireless DECT handset
Type of Phone Two types of phones may be selected including type for
GDC-450H and type for LWS-WK.
GDC-34x/4xx
LWS-WK
GDC-34x/4xx
Press [SEND] after entering the number and type.
DECT Unsubscribe Terminates the subscription for a DECT handset.
Station Number Enter the registered station number and click [SEND], Station number
the subscription is terminated and the wireless DECT
handset will no longer be serviced.
DECT Mobility When a DECT handset is registered at multiple systems
that are networked, calls can be routed over the network
to the DECT handset location.
Station Number Enter the registered station number, select Mobility ON Station number
or OFF and click [SEND].
Registered Stations Displays all registered DECT handsets.
3.1.3 CO Line Registration
3.1.3.1 CO Channel List
CO channel list is displayed on this page; a user can view CO line numbers, and connect status of
each CO channel. In addition, a user can change the usage of each CO channel and jump to
routing program for each CO line types.
3.1.3.2 MSN Configuration
This page is enabled only when iPECS SBG-1000 has BRI port (BRIU option board is installed).
MSNs can be assigned in iPECS SBG-1000 up to 5 Calling/Called IDs. Those values are used for
CLI of outgoing call and for incoming call routing. Last 3 digits of IDs are treated as flexible DID
table bin while incoming call routing.
3.1.3.3 SIP ID Configuration
Various parameters must be entered for proper operation of SIP Trunking including SIP
registration related information and the program for incoming call routing.
3-4