iPECS SBG-1000 User Manual

iPECS SBG-1000 User Manual (DATA Features)
Figure 6.231 Network Connection list
You can see new interface ‘WAN Ethernet VLAN 10’. When SIP (source IP) of packets is
included 10.10.10.0/24, those packets will be transmitted via WAN with VLAN ID 10. And when
DIP (destination IP) of packets belonging to 10.10.10.0/24 is received from WAN, WAN will
check VLAN ID. If the packet doesn’t have VLAN ID 10, the packet will be discarded.
6.4.17.5.2 How to divide LAN ports in two VLAN
If you would like to divide LAN ports into two VLAN like below figure, perform these following
steps. This example is started from Section Section 6.4.17.5.1 ‘How to use VLAN tag on WAN
device’. If you don’t want VLAN interface on the WAN side, you can ignore interface WAN0.10
configuration.
Figure 6.232 Dividing LAN ports use case
Create new VLAN interface on ‘LAN Bridge’ with VLAN ID 10 and set IP address
192.168.10.1/24.
Refer to Section 6.4.17.2 Creating a VLAN Interface. In the ‘Network Connections’ screen
under ‘System’ (see Figure 6.11), click the ‘New Connection’ link. The ‘Connection Wizard’
screen appears (see Figure 6.12). Select the ‘Advanced Connection’ radio button and click
‘Next’. The ‘Advanced Connection’ screen appears. Select the ‘VLAN Interface’ radio button
and click ‘Next’. The ‘VLAN Interface’ screen appears.
276